5-52
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
clralm
clralm
To clear alarms on a specific VISM card line, use the cl r al m com ma nd in the VoIP switching/trunking,
switched AAL2 PVC, and AAL2 trunking operating modes.
clralm -ds1 line-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines This command clears alarms caused by the collection of statistical data. Alarms caused by network
failure cannot be cleared by using this command. For example, an alarm caused by a collect ion of bipolar
errors can be cleared, but an alarm caused by a line failure cannot. Alarms that occur after you execute
this command are not affected.
Examples The following example shows that any alarms caused by statistical data are cleared from line 1:
clralm -ds1 1
Related Commands
-ds1 The mandatory line-num argument identifier.
line-num Line number in which to clear alarms. In the range from 1 to 8.
Command Description
clralms Clears alarms on a VISM card.
dspalm Displays the alarms associated with a specified line.
dspalms Displays all alarms for the selected line type (T1 or E1) on a card.