5-448
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsptoneprovplans
dsptoneprovplans
To display all provisional tone plans, use the dsptoneprovplans command in the VoIP
switching/trunking and switched AAL2 PVC operating modes.
dsptoneprovplans
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines This command displays the status of tone plans in the following ways:
•Configure—Downloaded properly and added to the system.
•Lost File—Not downloaded properly or for a tone plan that is not the proper one.
•Reloading—Currently downloading.
Examples The following example shows that all provisional tone plans ar e displ aye d:
dsptoneprovplans
Status Tone Plan Region Version Tone Plan File Name
--------- ---------------- ------- -------------------
configure singapore 11 sing_3
.
.
.
Number of Provisionable Tone Plans = 1.
Number of un-configured Tone Plans = 31.
Related Commands Command Description
addtoneplan Adds a tone plan to the current VISM card.
cnflnringback Configures the ringback tone method for a specified line on the current VISM
card.
cnflntoneplan Assigns a tone plan to a specified VISM card line.
cnflntonetimeout Modifies the timeout periods of all call progress tones supported by VISM on
a specified VISM card line.
dellntoneplan Deletes the tone plan configuration of a specified VISM card line.
deltoneplan Deletes a previously added tone plan from the current VISM card.
dsplnringback Displays the ringback tone method for a specified line on the current VISM
card.
dsplntoneplan Displays the tone plan configuration of a specified VISM card line.
dsplntonetimeout Displays the configured timeout periods for all call progress tones of a
specified VISM card line.