5-323
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcds
dspcds
To display a list of chassis card types, with associated slot numbers, card status, alarm status, and
redundancy status, use the dspcds command in the VoIP switching/trunking, switched AAL2 PVC, and
AAL2 trunking operating modes.
dspcds
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the list of ch as si s c ar d ty p es , wi t h ass oci a ted s ta t us d at a, ar e
displayed:
dspcds
Slot CardState CardType CardAlarm Redundancy
---- --------- -------- --------- ----------
1.1 Empty Clear
1.2 Active VISM-8T1 Clear
.
.
.
1.32 Active VISM-8E1 Clear
Related Commands Command Description
dspcd Displays the current VISM card’s configuration, status, and hardware and firmware
configuration data.
version Displays version-related information for a VISM card.