5-319
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspccs
dspccs
To display the configuration data of a previously added common channel signaling (CCS) channel, use
the dspccs command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
operating modes.
dspccs line-num ds0-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the configuration data of the CCS channel identified by line number
1 and DS0 number 10 are displayed:
dspccs 1 10
ds0IfIndex: 10
RowStatus: active
LcnNum: 36
MaxFrameSize: 300
Related Commands
line-num Line number of the previously added CCS channel in the range from 1 to 8.
ds0-num DS0 number of the previously added CCS channel. It can be a value f rom one of the
following ranges:
•1 to 24 for T1 lines
•1 to 31 for E1 lines
Command Description
addccs Adds a CCS channel (D channel) to a VISM card.
delccs Deletes the association between a CCS (DS0) channel and its corresponding virtual
channel.
dspccschans Displays all CCS configured channels.