5-107
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfcaspackage
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines This command enables RFC 3064 support.
Examples The following example shows that the MGCP packages for endpoint number 83 are configured wit h
mgcplin as the MGCP incoming package name and mgcplou t a s the M GCP outgo i ng pa ck age na me:
cnfcaspackage 83 mgcp1in mgcp1out
Related Commands
out-package Package name to be used for persistent events observed on an outgoing
telephony call. It can be one of the following values:
•MS = PBX DID/DOD trunks and incoming or outgoing MF wink start
trunks
•DT = DTMF and dial pulse1 trunks (except basic PBX)
•MD = North American MF Feature Group D EANA and EAIN
•MO = FGD Operator Services Signaling outgoing trunks only
•BL = DTMF and dial pulse1 basic PBX trunks
•L = Line
•H = Handset
•Basic = It can be from the following:
–
G—generic
–
D—DTMF
–
M—MF
–
T—Trunk
–
L—Line
–
H—Handset
–
R—RTP
–
A—Announcement Server
•Script—Script
Note If you set the package to anything other than basic on an endpoint with
this command, persistent events observed on that endpoint are encoded
as an event in that package if the event is defined in that package, or
dropped if they are not defined in that package. Packages N and S are
not supported.
1. Dial pulse is not supported in VISM.