5-241
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
delanndynamic
delanndynamic
To delete an announcement file and associated codec type from the temporary announcement files
currently saved in the VISM card, use the delanndynamic command in the VoIP switching operating
mode.
delanndynamic ann-filename codec-type
Syntax Description
Command Modes VoIP switching
Usage Guidelines This command does not report an error if the requested file identified by the ann-filename argument is
not found.
The G.723.1 codecs are supported for VISM-PR cards and are not supported for VISM cards.
Examples The following example shows that the femalezero1 announcement file and its associated codec type of
G.726-40k is deleted from the temporary announcement files currently saved in the VISM card:
delanndynamic femalezero1 9
ann-filename Announcement file filename. It can be from 1 to 64 a lpha nu meri c c ha racte rs,
including the following symbols—period (.), forward slash (/), unde rsc ore (_) ,
and hyphen (-).
codec-type The type of coding/decoding to be performed on the data stream. It can be one of
the following values:
•1 = G.711u
•2 = G.711a
•3 = G.726-32k
•4 = G.729a
•5 = G.729ab
•7 = G.726-16k
•8 = G.726-24k
•9 = G.726-40k
•11 = G.723-H
•12 = G.723a-H
•13 = G.723.1-L
•14 = G.723.1a-L