5-55
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
clralms
clralms
To clear alarms on a VISM card, use the clralms command in the VoIP switching/trunking, switched
AAL2 PVC, and AAL2 trunking operating modes.
clralms
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines This command can clear alarms caused only by the collection of statistical data. Alarms caused by
network failure cannot be cleared. For example, an alarm caused b y a collec tion of bipo lar err ors can be
cleared, but an alarm caused by a line failure cannot. Alarms occurring after this command executes are
not affected.
Examples The following example shows that the alarms are cleared on the current VISM card:
clralms
Related Commands Command Description
clralm Clears alarms on a specific line of a VISM card.
dspalm Displays the alarms associated with a specified line.
dspalms Displays all alarms for the selected line type on a VISM card.