5-432
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspsrcppeergrpparams
dspsrcppeergrpparams
To display the Simple Resource Control Protocol (SRCP) parameters for all call agent redundancy
groups that have SRCP added, use the dspsrcppeergrpparams command in the VoIP switching/trunking
and switched AAL2 PVC operating modes.
dspsrcppeergrpparams
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the SRCP parameters for all call agent redun da ncy gro ups th at have
SRCP added are displayed:
dspsrcppeergrpparams
Mgc Grp Num HeartbeatIntv TimeSinceHeartbeat MaxPdu
----------- ------------- ------------------- ------
1 120 0 4096
Related Commands Command Description
addmgcgrpentry Configures call agents as part of an MGC redundancy group and assigns a
priority value for a call agent.
addmgcgrpprotocol Associates a call agent redundancy group to a gateway control protoco l.
cnfmgcgrpentry Modifies the call agent priority level of a call agent within a call agent
redundancy group.
cnfmgcgrpparam Modifies a call agent redundancy group state change notification policy
and priority level.
cnfsrcppeer Configures the SRCP parameters when SRCP is the selected protocol for
communication between the VISM card and call agent.
cnfsrcppeergrpparam Modifies the SRCP heartbeat interval and maximum UDP size for a
specified call agent redundancy group.
delmgcgrpentry Deletes a call agent from a call agent redundancy group.
delmgcgrpprotocol Deletes an MGCP from a specified call agent redundan cy group .
dspmgcgrpparams Displays all configured call agent redundancy group parameters.
dspmgcgrpprotocols Displays all configured call agent redundancy group protocols.
dspmgcgrps Displays all configured call agent redundancy groups.