5-348
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspendpts
dspendptsTo display configuration data about all endpoints on a VISM card, use the dspendpts command in the
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspendpts
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the configuration data for all endpoints on the current VISM card are
displayed:
dspendpts
EndptNum Ena/Speed
-------- --- -----
1 act/ 64k
2 act/ 64k
3 act/ 64k
Related Commands Command Description
addendpt Adds an endpoint on a VISM card.
addendpts Adds multiple consecutive numbers of endpoints to a VISM card.
delendpt Deletes a specified endpoint on a VISM card.
dspendpt Displays configuration data about a VISM card endpoint.