5-22
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
addendpts
addendpts
To add multiple consecutive number of endpoints with a single command, use the addendpts command
in the VoIP switching/trunking, switched AAL2 PVC, AAL2 trunking, and switched ATM AAL1 SVC
operating modes.
addendpts start-endpt start-line-num start-ds0-num endpt-quantity
Syntax Description start-endpt First endpoint number of a range of consecutive endpoints. It can be a value from
one of the following ranges:
•For template number 1:
–
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 2:
–
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
•For template number 3:
–
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 4:
–
For VISM-PR, from 1 to 144
start-line-num Line number to which the endpoints are added. In the range from 1 to 8.