5-475
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspxgcpendptcons
dspxgcpendptcons
To display the attributes of all connections associated with an endpoint added usin g t he addendpt
command, or the SNMP equivalent, use the dspxgcpendptcons command in the VoIP
switching/trunking and switched AAL2 PVC operating modes.
dspxgcpendptcons line-num ds0-num display-level
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the attributes of all connections associated by the endpoint identified
by line number 1, DS0 number 1 are displayed in the detailed format:
dspxgcpendptcons 1 1 2
*********************************************************
Attributes of Connection ID:1
*********************************************************
Call ID = 634
Endpoint Name = vism/T1-1/1
Line Number = 1
Connection ID = 1
Admitted Codec = PCMU
Admitted Pkt. period = 10 ms
Connection Mode = sendrecv
Echo Cancellation = TRUE
Type of Service = 0xa0
Network Type = IP
Remote Address Type = Invalid (0)
Continuity Test = FALSE
Loopback = FALSE
Local RTP Port = 49152
Remote RTP Port = 49154
Remote RTP Port Count = 1
Remote Address = nn.nnn.n.n
Remote SDP = TRUE
MGC Domain Name = vsc-1
line-num Line number of the endpoint connections for which you wa nt to display the attributes.
It can be in the range from 1 to 8.
ds0-num DS0 number of the endpoint connections for which you want to display t he attributes.
It can be a value from one of the following ranges:
•1 to 24 for T1 lines
•1 to 31 for E1 lines
display-level Detail level of display. It can be one of the following values:
•1 = Abbreviated display.
•2 = Detailed display.