5-469
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspxgcpcons
dspxgcpcons
To display the xGCP connection identification number, endpoint name, and call identification number
corresponding to each call agent established connection on the gateway, use the dspxgcpcons command
in the VoIP switching/trunking and switched AAL2 PVC operating modes.
dspxgcpcons
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the xGCP connection id en tification number, endpoint name, and call
identification number of each call agent established connection on the gateway are displayed:
dspxgcpcons
xGCP Connection ID xGCP Endpoint Name xGCP Call ID
----------------- ------------------ ------------
4c5b vism/T1-1/1 C0011
4c5c vism/T1-1/2 C0012
Related Commands Command Description
delxgcpcon Deletes an xGCP connection specified by the xGCP connection identification
number.
dspxgcpcids Displays the LCN, CID, xGCP connection ID, endpoint name, and call ID
corresponding to each call agent established AAL2 connection on the gateway.
dspxgcpendpts Displays the xGCP endpoint names of all endpoints added with the add en dpt
command, or the SNMP equivalent.