5-177
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnflntonetimeout
Examples The following example shows that the VISM card line number 7 is configured with a 200-second remote
ringback tone timeout period, a 180-second local ringback tone timeout period, a 210-se co nd busy tone
timeout period, a 400-second reorder tone timeout period, a 1 000 -seco nd dia l tone ti m eout peri o d, a
2000-second stutter dial tone timeout period, and a 500-second offhook tone timeout period:
cnflntonetimeout 7 200 180 210 400 1000 2000 3000 500
Related Commands Command Description
addtoneplan Adds a tone plan to the current VISM card.
cnflnringback Configures the ringback tone method for a specified line on the current VISM
card.
cnflntoneplan Assigns a tone plan to a specified VISM card line.
dellntoneplan Deletes the tone plan configuration of a specified VISM card line.
deltoneplan Deletes a previously added tone plan from the current VISM card.
dsplnringback Displays the ringback tone method for a specified line on the current VISM
card.
dsplntoneplan Displays the tone plan configuration of a specified VISM card line.
dsplntonetimeout Displays the configured timeout periods for all call progress tones of a
specified VISM card line.
dsptonebuiltinplans Displays all preconfigured (built-in) tone plans on the current VISM card.
dsptoneplan Displays the tone configuration of a specified tone plan—either a
preconfigured (built-in) or user-added tone plan.
dsptoneplans Displays the tone configuration of all tone plans—either preconfigured
(built-in) or user-added tone plans.
dsptoneprovplans Displays all user-added (provisional) tone plans.
dsptoneregionplans Displays a list of all tone plans for the countries and regions whose name
partially or completely matches the name you supply.