5-255
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
delendpts
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines This command results in a graceful transition to the out-of-service state for each deleted endpoint and
an RSIP to be sent to each associated call agent indicating the out-of-service state of the endpoints.
If the specified range of endpoints to be deleted contains gaps, t he gaps are not counted. For example, if
the current endpoints are 3, 4, 7, 8, 9 10, 11,12 and the command specifies a start at 4 and a number of
5, the endpoints deleted are 4, 7, 8, 9, and 10.
Examples The following example shows that 10 endpoints are deleted, sta rti ng with e ndpoi nt n umb er 1 20:
delendpts 120 10
Related Commands Command Description
addendpt Adds an endpoint on a VISM card.
dspendpt Displays data about a specified endpoint on a VISM card.
dspendpts Displays data about all endpoints on a VISM card.