5-315
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcasvar
dspcasvar
To display data about channel associated signaling (CAS) variants for a given variant name, use the
dspcasvar command in the VoIP switching/trunking operating mode.
dspcasvar var-name
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command
Examples The following example shows that the CAS variant data for the CAS variant identified b y the n ame first
is displayed:
dspcasvar first
CasVariantName: first
CasFileName: wink.dod
Ringing time: 30
Digit method: DTMF
Partial dial timing: 16
Critical dial timing: 4
Interdigit timeout: 1
CasVariantState: configured
CasRowStatus: Add
Country code: US
Related Commands
var-name Name of the CAS variant; a text string of 1 to 64 alphanumeric characters.
Command Description
addcasvar Adds a CAS variant to a VISM card.
cnfcasvar Configures CAS variant and CAS timing parameters for a variant already created
with the addcasvar command.
delcasvar Deletes a CAS variant.