5-194
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfprofparams
cnfprofparams
To configure a profile preference, use the cnfprofparams command in the switched AAL2 PVC and
AAL2 trunking operating modes.
cnfprofparams profile-type profile-num profile-pref
Syntax Description
Command Modes Switched AAL2 PVC and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the ITU profile type, profile number 1 is configured wit h the midrange
preference level of 4:
cnfprofparams 1 1 4
Related Commands
profile-type The profile type to be used for the CID. It can be one of the following values:
•1 = International Telecommunication Union (ITU) I.366.2
•3 = Custom
profile-num Number of the profile. It can be one of the following values:
•1 = ITU profile type
•2 = ITU profile type
•3 = ITU profile type
•7 = ITU profile type
•8 = ITU profile type
•12 = ITU profile type
•100 = custom profile types
•101 = custom profile types
•110 = custom profile types
•200 = custom profile types
profile-pref Profile preference. It can be one of the following values:
•0 = No preference; exclude the profile from xGCP pr ofile negot iat ion
•In the range from 1 (highest preference; default) to 10 (lowest preference)
Command Description
dspprofparams Displays the profile elements and preferences for all profiles.