5-156
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnflapdretrans
cnflapdretrans
To configure a maximum number of frame retransmissions for a previously added Link Access Protocol
D channel (LAPD), use the cnflapdretrans command in the VoIP switching/trunking operating mode.
cnflapdretrans line-num ds0-num n200
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that line 2, DS0 12 is configured with a maximum number of 10 frame
retransmission attempts:
cnflapdretrans 2 12 10
Related Commands
line-num Line number of the D channel to be configured. In the ra nge f rom 1 to 8.
ds0-num DS0 number that was specified in the addlapd command. It can be a value
from one of the following ranges:
•1 to 24 for T1 lines
•1 to 31 for E1 lines
n200 Maximum frame retransmissions in the range from 1 to 10.
Command Description
cnflapdtimer Configures two LAPD timers for a previously added LAPD.
cnflapdtype Configures the various types of LAPD stacks for a previously added LAPD.
cnflapdwinsize Configures the maximum number of outstanding (unacknowledged) I-fram es.