5-421
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspsarmsgcnt
dspsarmsgcnt
To display the segmentation and reassembly (SAR) control message counter values for a VISM card, use
the dspsarmsgcnt command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
operating modes.
dspsarmsgcnt
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the SAR control message counter values for the current VISM card
are displayed:
dspsarmsgcnt
RiscXmtCtrlMsg: 83606
RiscRcvCtrlMsg: 83606
SARXmtCtrlMsg: 83445
SARRcvCtrlMsg: 83606
SARCtrlMsgDiscLenErr: 0
SARCtrlMsgDiscCRCErr: 0
SARCtrlMsgDiscUnknownChan: 0
SARCtrlMsgLastUnknownChan: 0
Related Commands Command Description
clrsarmsgcnt Clears the control message counters from a VISM card.