5-424
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspsesgrps
dspsesgrps
To display configuration data about all Primary Rate Interface (PRI) backhaul session gr oups, use th e
dspsesgrps command in the VoIP switching/trunking operating mode.
dspsesgrps
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the configuration data of the current PRI backhaul session groups is
displayed:
dspsesgrps
GrpNum SetNum State ActiveSes TotalSes Mgc SwitchFail SwitchSuccess
----------------------------------------------------------------------------
2 1 ? 0 0 abc 0 0
3 1 ? 0 0 svc 0 0
Related Commands Command Description
addsesgrp Adds a PRI backhaul session group between a VISM card and a call agent.
delsesgrp Deletes a PRI backhaul session group.
dspsesgrp Displays configuration data of a PRI backhaul session group.