5-468
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspxgcpcon
MDCX Ack (MDCX Ack - CRCX) = 80.000000000 ms
Time since the CRCX was received = 2016.930000000 sec
(CRCX Command is not shown since it is used as reference)
Codec List: Codec[1] = PCMA
Pkt. Period List[1]: Pkt. Period[1] = 10 ms
Pkt. Period Range[1] - Low = 10 ms
Pkt. Period Range[1] - High = 10 ms
LCO Codec List[1] = PCMA
LCO Pkt. Period Range - Low = 0 ms
LCO Pkt. Period Range - High = 0 ms
TDM Endpoint Connected to DSP Channel = TRUE
DSP Channel Connected to Network Endpoint = TRUE
Related Commands Command Description
delxgcpcon Deletes an xGCP connection specified by the xGCP connection identification
number.
dspxgcpcids Displays the LCN, CID, xGCP connection ID, endpoint name, and call ID
corresponding to each call agent established AAL2 connection on the gateway.
dspxgcpcons Displays the xGCP connection identification number, endpoint name, and call
identification number corresponding to each call agent es ta bli shed c on ne ction on
the gateway.
dspxgcpendpts Displays the xGCP endpoint names of all endpoints added with the add en dpt
command, or the SNMP equivalent.