5-374
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsplnstate
dsplnstate
To display the service state of specified T1 or E1 line with respect to the xGCP protocol, use the
dsplnstate command in the VoIP switching/trunking and switched AAL2 PVC operating modes.
dsplnstate line-num
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Service states are expressed as administrative or operational. For each service state there is an actual
state and an effective state. The actual states are described in the following list:
•Actual administrative states:
–
In service
–
Pending out of service
–
Command out of service
–
Inactive
–
Invalid state
•Actual operational states:
–
Alarm
–
OK
The effective administrative state is the combination state of the gateway and the line.
The effective operational state is the combination alarm state of the gateway and t he line .
Examples The following example shows that the service states of line 1 are displayed:
dsplnstate 1
Line number : 1, Actual admin. state : Inactive
Actual oper. state : OK
Line number : 1, Effective admin. state : Inactive
Effective oper. state : OK
Related Commands
line-num Line number for which you want to display the service state. It can be in the range
from 1 to 8.
Command Description
dspgwstate Displays the current user-configured service states of the gateway.