1-24
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter1 Overvi ew of the VISM and VISM-PR Cards
Software Upgrades
Download VISM-PR Boot Code and Firmware to PXM1E and PXM45
To download the VISM-PR boot code and firmware to the PXM1E or PXM45 card, use FTP.
Step1 Access the image on the Cisco Web site.
Step2 To download the image, enter the ftp command.
ftp node-ip
where node-ip is the IP address of the node to which you want to download t he i m ag e.
Step3 Enter your user name and password.
Step4 Enter bin.
Step5 Access the appropriate directory.
cd C:FW
Step6 Download the image to your C:FW directory.
put image-version
where image-version is the downloaded image from Step 1.
Step7 To exit the download procedure, enter bye.
Upgrade VISM-PR Firmware with PXM1E and PXM45 Cards
Ensure that the VISM-PR cards have the minimum boot code version of vism_8t1e1_VI8_BT_3 .1.00.fw.
The following versions of VISM-PR software Release 3.0 are available:
•003.000.000.000—without CALEA
•003.050.000.000—with CALEA
Perform the firmware upgrade on the VISM-PR cards.
Step1 Log in to the active PXM1E or PXM45 card.
Step2 Ensure that the card is in the redundant mode, where the active card is the primary card.
Step3 To save the existing configuration as a contingency plan, enter the saveallcnf command.
Step4 To load the new software, enter the loadrev command.
loadrev sm-primary-slot-num new-rev
where sm-primary-slot-num is the slot number of the VISM-PR card in which you want to install the new
software; and new-rev is the new firmware version number for the VISM-PR software.
Caution Temporary traffic loss occurs.
Step5 To execute the download, enter the runrev command.
runrev sm-primary-slot-num new-rev
Caution Temporary traffic loss occurs.