5-186
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfmusicthreshold
cnfmusicthreshold
To configure the music on-hold threshold value for the current VISM card, use the cnfmusicthreshold
command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
cnfmusicthreshold music-thresh
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines This command allows you to adjust the threshold level detected by DSPs to interpret TDM side silence
or voice.
Examples The following example shows that the current VISM card is co nfigured w it h a – 45 -dB mu sic on-hol d
threshold value:
cnfmusicthreshold -45
Related Commands
music-thresh Music on-hold threshold (defined in decibels). It can be in the range from
–70 to –30.
Command Description
cnfds0musicthreshold Configures the music on-hold threshold for a specified DS0.
cnflnmusicthreshold Configures the music on-hold threshold for all DS0s on a specified line.
dspds0musicthreshold Displays the music on-hold threshold value for a specified DS0.
dsplnmusicthreshold Displays the music on-hold threshold values for the DS0s on a specified
line.
dspmusicthreshold Displays the music on-hold threshold values for the current VISM card.