5-483
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspxgcpport
dspxgcpport
To display the local User Datagram Protocol (UDP) port number used by the Simple Gateway Control
Protocol (SGCP) or the Media Gateway Control Protocol (MGCP), use the dspxgcpport command i n
the VoIP switching/trunking operating mode.
dspxgcpport
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the UDP port number used by SGCP/MGCP is displayed:
dspxgcpport
xgcpPortNumber: 2427
Related Commands Command Description
cnfxgcppeer Configures the UDP port number used to send gateway-initiated messages to the call
agent.