5-120
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfcodecneg
cnfcodecneg
To configure the priority order of the lists of codec list priority order, use the cnfcodecneg command in
the VoIP switching/trunking operating mode.
cnfcodecneg codec-priority
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines Codec lists include the following:
Call agent provided list in a local connection option (LCO)
Remote gateway provided list in the Session Description Protocol (SDP) data
Local MIB provided list
Examples The following example shows that the LCO list is the first priority, SDP data list is the second, and the
list from the local MIB is the last priority:
cnfcodecneg 1
Related Commands There are no related commands.
codec-priority The codec list priority scheme. It can be one of the following values:
1 = LCO list, remote SDP data list, local MIB
2 = LCO list, local MIB, remote SDP data list
3 = Remote SDP data list, LCO list, local MIB
4 = Remote SDP data list, local MIB, LCO list
5 = Local MIB, LCO list, remote SDP data list
6 = Local MIB, remote SDP data list, LCO list