5-270
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
delrudptrunk
delrudptrunk
To delete an ISDN PRI backhaul Reliable User Datagram Protocol (RUDP) session that is asso cia ted
with a Link Access Protocol D channel (LAPD), use the delrudptrunk command in the VoIP
switching/trunking operating mode.
delrudptrunk session-num
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines You must use the dellapdtrunk command to delete the LAPD trunk before you delete the RUDP trunk.
Examples The following example shows that the ISDN PRI backhaul RUDP session number 51, which is
associated with an LAPD, is deleted:
delrudptrunk 51
Related Commands
session-num Identifying session number in the range from 1 to 64.
Command Description
addlapdtrunk Adds an LAPD trunk to a specific VISM card line.
addrtpcon Adds a static RTP VoIP trunking connection.
addrudptrunk Adds an ISDN PRI backhaul RUDP session for an LAPD trunk connection.
clrrtpcnt Clears the RTP counters (statistics) for a specific static RTP connection.
cnflapdtrunkpvc Assigns the PVC trunk type that carries LAPD messages for the curren t VISM
card.
cnflntrunkcond Enables or disables line conditioning on a VISM card line if a network alarm
is encountered.
cnfrtpcon Modifies an existing static RTP VoIP trunking connection.
cnfrudptrunkrmtip Modifies the remote IP address of VISM used in the ISDN PRI backha ul R UDP
trunk for a specified session.
dellapdtrunk Deletes an LAPD configured line.
delrtpcon Deletes a static RTP VoIP trunking connection.
dsplapd Displays data about an LAPD.
dsplapdtrunkpvc Displays the assigned PVC trunk type that carries LAPD trunk messages for
the current VISM card.
dsplapdtrunks Displays the configuration data of all LAPD trunks.
dsprtpcnt Displays the bearer counters (statistics) for a specified RTP VoIP trunking
connection.
dsprtpcon Displays the configuration data of a specified static RTP VoIP trunking
connection.