5-477
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspxgcpendpts
dspxgcpendpts
To display the xGCP endpoint names corresponding to each endpoint which has been added using the
addendpt command, or the SNMP equivalent, use the dspxgcpendpts command in the VoIP
switching/trunking and switched AAL2 PVC operating modes.
dspxgcpendpts
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines The xGCP endpoint name is displayed with this command regardless of whether there are call agent
established connections associated with the endpoint. If there are call agent established connections
associated with the endpoint, the corresponding xGCP connection identification number and call
identification number appear on the same line as the endpoint name.
Examples The following example shows that the endpoint names that co rrespo nd t o ea ch e ndp oint ar e displ aye d:
dspxgcpendpts
xGCP Endpoint Name xGCP Connection ID xGCP Call ID
------------------ ------------------ --------------
vism/T1-1/1 4c5b C0011
vism/T1-1/2 4c5c C0012
vism/T1-1/3
vism/T1-1/4
vism/T1-1/5
vism/T1-1/6
vism/T1-1/7
vism/T1-1/8
vism/T1-1/9
vism/T1-1/10
vism/T1-1/11
vism/T1-1/12
vism/T1-1/13
vism/T1-1/14
vism/T1-1/15
vism/T1-1/16
vism/T1-1/17
vism/T1-1/18
vism/T1-1/19
vism/T1-1/20
vism/T1-1/21
vism/T1-1/22
vism/T1-1/23
vism/T1-1/24
Related Commands Command Description
dspxgcpendpt Displays the xGCP endpoint names corresponding to each endpoint number.