5-235
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfxgcpinteropsdpost
cnfxgcpinteropsdpost
To enable or disable the Session Descriptor Protocol (SDP) OST interoperability in the call control protocol,
use the cnfxgcpinteropsdpost command in the VoIP switching/trunking operating mode.
cnfxgcpinteropsdpost sdp-ost-enable
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines When a CRCX or MDCX command is received from the call agent, VISM can respond by building SDP
OST (O =, S =, and T = lines).
If a peer gateway does not support SDP OST, this command can be used to prevent VISM from building
SDP OST lines.
Examples The following example shows that SDP OST interoperability is disabled:
cnfxgcpinteropsdpost 2
Related Commands
sdp-ost-enable Enables or disables SDP OST interoperability. It can be one of the following
values:
•1 = On (default)
•2 = Off
Command Description
dspxgcpinterops Displays the SDP OST interoperability feature configuration.