5-411
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsprtpconnstat
dsprtpconnstat
To display the Real-Time Transport Protocol (RTP) connection statistics for a specified endpoint, use
the dsprtpconnstat command in the VoIP switching/trunking, switched AAL1 SVC, switched AAL2
SVC, switched AAL2 PVC, AAL2 trunking, VoIP and switched ATM AAL1 SVC operating modes.
dsprtpconnstat endpt-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2
trunking, VoIP and switched ATM AAL1 SVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows the RTP connection statistics for endpoint 202:
dsprtpconnstat 202
No. of RTP Packets Sent = 0
No. of RTP Packets Received = 0
No. of Octets Sent = 0
No. of Octets Received = 0
No. of RTP Packets Lost = 0
Interarrival Jitter = 80
Latency = 0
endpt-num Endpoint number. It can be a value from one of the following ranges:
For template number 1:
For VISM, from 1 to 145
For VISM-PR T1, from 1 to 192
For VISM-PR E1, from 1 to 248
For template number 2:
For VISM T1, from 1 to 192
For VISM E1, from 1 to 248
For template number 3:
For VISM, from 1 to 120
For VISM-PR T1, from 1 to 192
For VISM-PR E1, from 1 to 248
For template number 4:
For VISM-PR, from 1 to 144