5-217
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfsrcpretry
cnfsrcpretry
To configure the VISM card level Simple Resource Control Protocol (SRCP) retry count, minimum
timeout, and maximum timeout, use the cnfsrcpretry command in the VoIP switching/trunking and
switched AAL2 PVC operating modes.
cnfsrcpretry srcp-min-tout max-srcp-retries |srcp-max-tout|
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines If you assign a value to the optional srcp-max-tout argument, VISM exponentially increases the timeout
value between the minimum and maximum timeouts. If you do not assign a maximum timeout, the
srcp-max-tout argument value is set equal to the srcp-min-tout argument value, which disables the
exponential back off.
Examples The following example shows that the current VISM card is configured with a 100-ms minimum SRCP
timeout period, a maximum of 5 SRCP retry attempts, and 1000-ms m axi mum SR CP t imeou t period :
cnfsrcpretry 100 5 1000
Related Commands
srcp-min-tout Minimum SRCP timeout (defined in milliseconds). It can be in the range from
1 to 10000. (Default = 500)
max-srcp-retries Maximum number of SRCP retries. It can be in the range from 0 to 10.
(Default= 3).
srcp-max-tout (Optional) Maximum SRCP timeout (defined in milliseconds). It can be in the
range from 1 to 10000. (Default = 500)
Command Description
dspsrcpretry Displays the VISM card level SRCP retry parameters—retry count, minimum
timeout, and maximum timeout.