4-4
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter4 Configuring VISM Features
Connecting to Cisco MGX 8000 Series Platforms
Note The default user name is cisco. You may change this username after your initial login is
complete. Consult the system administrator for valid user names.
The password prompt is displayed:
password:
Step 3 Type your password and press Enter.
For security, the password is displayed as asterisks:
password: *****
Note The default password is cisco. You may change this password after your initial login is
complete. Consult the system administrator for valid passwords.
The following prompt is displayed:
card number [7]:
Step 4 If you know the VISM card slot number of the card you want to configure, proceed to Step 5. If you do
not know the VISM card slot number of the card you want to configure, proceed to Step 6.
Step 5 Type the VISM card slot number and press Enter.
The VISM card prompt is displayed. See the “VISM Card Prom pt ” se cti on on pa ge 4-5 for more
information. You have completed logging in to the PXM and VISM cards and can now perform the
mandatory initial VISM card configuration. Proceed to the “Initial VISM Configuration” section on
page 4-6.
Step 6 Type the slot number of the active PXM card (either 7 or 8) and press Enter.
The PXM card prompt is displayed:
NODENAME.1.7.PXM.a >
Step 7 Type the dspcds command to display available card types and press Enter.
A list of available card types and associated states is displayed for the MGX 8000 Series platform with
which you are connected. The display is similar to the following:
NODENAME.1.7.PXM.a > dspcds
Slot CardState CardType CardAlarm Redundancy
---- ----------- -------- --------- -----------
1.1 Empty Clear
1.2 Active VISM-8T1 Clear
1.3 Empty Clear
1.4 Empty Clear
1.5 Empty Clear
1.6 Empty Clear
1.7 Active PXM1-OC3 Minor
1.8 Empty Clear
1.9 Active VISM-8E1 Clear
1.10 Empty Clear
1.11 Active VISM-8T1 Clear
1.12 Boot VISM-8T1 Clear
1.13 Active VISM-8T1 Clear
1.14 Active VISM-8E1 Clear
1.15 Empty Clear
1.16 Empty Clear