5-88
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfcalea
cnfcalea
To enable or disable the Communications Assistance for Law Enforceme nt Act (CALEA) feature on the
current VISM card, use the cnfcalea command in the VoIP switching/trunking, switched AAL2 PVC,
and AAL2 trunking operating modes.
cnfcalea calea-enable
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines You must ensure that you are using the VISM software version that supports CALEA in order to use the
CALEA feature. The CALEA implementation supports the CALEA law intercept confirmation in terface.
Examples The following example shows that the CALEA feature is enabled on the current VISM card:
cnfcalea 1
Related Commands
calea-enable Enables or disables the CALEA feature. I t c an be one o f t h e fol lowing value s:
•1 = On
•2 = Off (Default)
Command Description
addcon Adds a PVC connection between a VISM card and any SM or PXM card.
cnfcon Configures a connection between a VISM card and an MGX 8000 Series
platform PXM card.
dspcalea Displays the CALEA feature configuration status of the current VISM card.
dspvismparam Displays the current VISM card configuration.