5-281
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspaal2profile
dspaal2profile
To display data about a specified AAL2 profile type and profile number, use the dspaal2profile
command in the AAL2 trunking operating mode.
dspaal2profile profile-type profile-num
Syntax Description
Command Modes AAL2 trunking
Usage Guidelines The AAL2 profiles correspond to the profile types ITU and ATMF as defined in the ITU-T I.366.2 and
ATM forum AF-VTOA-0113 standards respectively.
Examples The following example shows that the data for AAL2 pr ofile ty pe 1 a nd profile n umb er 1 is d is play ed :
dspaal2profile 1 1
UUI Packet Packet Seq. No.
Codepoint Length Time Interval
Range (octets) Codec SID M (ms) (ms)
0-15 40 PCMU No SID 1 5 5
0-15 40 PCMA No SID 1 5 5
Related Commands There are no related commands.
profile-type The profile type to be used for the CID. It can be one of the following values:
•1 = International Telecommunication Union (ITU) I.366.2
•3 = Custom
profile-num Number of the profile. It can be one of the following values:
•1 = ITU profile type
•2 = ITU profile type
•3 = ITU profile type
•7 = ITU profile type
•8 = ITU profile type
•12 = ITU profile type
•100 = custom profile types
•101 = custom profile types
•110 = custom profile types
•200 = custom profile types