5-169
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnflnmusicthreshold
cnflnmusicthreshold
To configure the music on-hold threshold for all DS0s on a specified line, use the cnflnmusicthreshold
command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
cnflnmusicthreshold line-num music-thresh
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the VISM card line number 3 DS0s are configured with –45 dB music
on-hold threshold:
cnflnmusicthreshold 3 -45
Related Commands
line-num Line number for which you want to configure the music on-hold threshold.
In the range from 1 to 8.
music-thresh Music on-hold threshold (defined in decibel s). It can be in th e ran g e fr o m
–70 to –30.
Command Description
cnfds0musicthreshold Configures the music on-hold threshold for a specified DS0.
cnfmusicthreshold Configures the music on-hold threshold value for the c urren t VISM ca rd.
dspds0musicthreshold Displays the music on-hold threshold value for a specified DS0.
dsplnmusicthreshold Displays the music on-hold threshold values for the DS0s on a specified
line.
dspmusicthreshold Displays the music on-hold threshold values for the current VISM card .