5-369
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsplngain
dsplngain
To display the adjustable gain for all DS0s on a specified VISM card line, use the dsplngain command
in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dsplngain line-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the adjustable gain values for all DS0s on VISM card line 3 are
displayed:
dsplngain 3
Ds0Num InputGain OutputAttenuation
------ --------- -----------------
1 0 100
2 10 60
.
.
.
Related Commands
line-num Line number for which you want to display the adjustable gain for all DS0s. In the
range from 1 to 8.
Command Description
cnflngain Configures the adjustable gain for all DS0s on a specified VISM card line.