5-379
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsploops
dsploops
To display all lines and DS0s that are in the loopback condition, use the dsploops command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dsploops
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the lines and DS0s that are currently in the loopback condition are
displayed:
dsploops
Line Loopbacks on this card
---------------------------
Line 1: Local Loopback
ds0 loopbacks on this card
--------------------------
Endpoint 1 Loopback Enabled
Related Commands Command Description
addconloop Configures a cellbus connection to local loopback condition on a current card.
addendptloop Places an endpoint in a loopback condition in the TDM direction.