5-213
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfsessyncatmps
cnfsessyncatmps
To configure the maximum number of attempts to synchronize with the call agent, use the
cnfsessyncatmps command in the VoIP switching/trunking operating mode.
cnfsessyncatmps session-num max-sync-attempts
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines Use this command for a previously added PRI backhaul session.
Examples The following example shows that session number 2 is configured wit h a ma xim um of 10
synchronization attempts with the call agent:
cnfsessyncatmps 2 10
Related Commands
session-num Identifying session number in the range from 1 to 64.
max-sync-attempts The maximum number of attempts to synchronize with the call agent. It can
be in the range from 1 to 32.
Command Description
cnfsesack Configures the timeout period before sending an acknowledgment, and th e
maximum number of acknowledgments that can be accumulated.
cnfsesmaxreset Configures the maximum number of resets that a VISM card performs before
a connection is reset.
cnfsesmaxseg Configures the maximum segment size, in octets, that can be received by a
VISM card after sending a synchronize message.
cnfsesoutofseq Configures the maximum number of out-of-sequence packets that ca n be
accumulated before sending an EACK packet.
cnfsesport Configures the port numbers of a previously added PRI backhaul session.
cnfsesretrans Configures the timeout period for unacknowledged packets and nu mber of
retransmissions.
cnfsesstatetmout Configures the number of milliseconds that VISM waits for a transfer state
before executing an auto reset.