5-189
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfprofelemvbd
cnfprofelemvbd
To configure the voiceband data (VBD) profile element for a profile , use the cnfprofelemvbd command
in the switched AAL2 PVC operating mode.
cnfprofelemvbd profile-type profile-num vbd-codec-type vbd-pkt-period
Syntax Description profile-type The profile type to be used for the CID. It can be one of the following values:
•1 = International Telecommunication Union (ITU) I.366.2
•3 = Custom
profile-num Number of the profile. It can be one of the following values:
•1 = ITU profile type
•2 = ITU profile type
•3 = ITU profile type
•7 = ITU profile type
•8 = ITU profile type
•12 = ITU profile type
•100 = custom profile type
•101 = custom profile type
•110 = custom profile type
•200 = custom profile type
vbd-codec-type The type of coding/decoding to be performed on the data stream . It c an be on e of
the following values:
•1 = G.711u
•2 = G.711a
•3 = G.726-32k
•6 = Clear channel (VAD must be off)
•7 = G.726-16k
•8 = G.726-24k
•9 = G.726-40k
•11 = G.723.1-H
•13 = G.723.1-L
vbd-pkt-period Packetization period (defined in milliseconds). It can be one of the following
values:
•5
•10
•30