5-249
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
delconloop
delconloop
To delete a local loopback state on a connection to the cellbus, use the delconloop command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
delconloop lcn
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the local loopback state is deleted from LCN 140:
delconloop 140
Related Commands
lcn Logical channel number of the connection from which you want to delete the local
loopback state, in the range from 131 to 510.
Command Description
addconloop Sets a cellbus connection to the local loopback state.