5-113
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfcaswinktime
To use this command, you must ensure that the endpoint indicated by the endpt-num argument value has
been previously added, and that the associated DS0 is configured for CAS.
Note To use this command, you must choose the MIB as the source in the cnfcasparamsource co mmand.
Examples The following example shows that endpoint 100 is configured with a wink time specification of 100 ms
for the minimum make time, 500 ms for the maximum wake time, and 100 ms for the minimum break
time:
cnfcaswinktime 100 500 100
Related Commands Command Description
dspcastimers Displays an endpoint’s currently configured CAS timers.