5-452
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspvbdcodec
dspvbdcodec
To display the upspeed codec used for voiceband data (VBD), use the dspvbdcodec command in the
VoIP switching/trunking operating mode.
dspvbdcodec
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the upspeed codec used f or V BD is displ aye d:
dspvbdcodec
VBD UpSpeed Codec: G.711u
Related Commands Command Description
cnfvbdcodec Configures the VBD upspeed codec.