5-252
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
delendpt
delendpt
To delete a specified endpoint on a VISM card line, use the delendpt command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
delendpt endpt-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines An endpoint cannot be deleted if CIDs are present.
This command results in a graceful transiti on to out of service and an RSIP to be sent to e ach associated
call agent indicating the endpoint out-of-service state.
Examples The following example shows that endpoint number 120 is del et ed:
delendpt 120
Related Commands
endpt-num Endpoint number. It can be a value from one of the following ranges:
•For template number 1:
–
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 2:
–
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
•For template number 3:
–
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 4:
–
For VISM-PR, from 1 to 144
Command Description
addendpt Adds an endpoint on a VISM card.
dspendpt Displays data about a specified endpoint on a VISM card.
dspendpts Displays information about all endpoints on a VISM card.