5-393
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspport
dspport
To display configuration data about the virtual port that you created with the addport command, use the
dspport command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating
modes.
dspport
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the configuration data about the virtual port created with the addport
command is displayed:
dspport
vismPortNum: 1
vismPortRowStatus: add
vismPortSpeed: 50000
vismPortState: active
Related Commands Command Description
addport Adds a virtual port between a VISM and PXM cards.
delport Deletes a virtual port between a VISM and PXM cards.