5-349
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspgain
dspgain
To display the adjustable gain for a specified VISM card, use the dspgain command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspgain
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the adjustable gain values for the curre nt VIS M card are disp laye d:
dspgain
LineNo/Ds0No InputGain OutputAttenuation
------------ --------- -----------------
1/1 0 100
1/2 10 60
.
.
.
Related Commands Command Description
cnfds0gain Configures the adjustable gain for a specified DS0.
cnfgain Configures the adjustable gain for a VISM card.
cnflngain Configures the adjustable gain for all DS0s on a specified VISM card line.
dspds0gain Displays the adjustable gain values for a specified DS0.
dsplngain Displays the adjustable gain for a specified VISM card line.