5-446
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsptoneplans
dsptoneplans
To display the tone configuration of all tone plans—either built-in (preconfigured) or provisional tone
plans—use the dsptoneplans command in the VoIP switching/trunking and switched AAL2 PVC
operating modes.
dsptoneplans
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines This command displays the status of tone plans in the following ways:
•Configure—For a built-in (preconfigured) tone plan, and a provisio nal tone plan tha t is do wn loaded
properly and added to the system.
•Lost File—For a provisional tone plan that is not downloaded properly or for a tone plan that is not
the proper one.
•Reloading—For a provisional tone plan that is currently downloading.
Examples The following example shows that the tone configuration for tone pl an s is displ ayed :
dsptoneplans
Status Tone Plan Region Version Tone Plan File Name
--------- ---------------- ------- -------------------
configure singapore 11 sing_3
configure ITU 1 BUILTIN
.
.
.
Related Commands Command Description
addtoneplan Adds a tone plan to the current VISM card.
cnflnringback Configures the ringback tone method for a specified line on the current VISM
card.
cnflntoneplan Assigns a tone plan to a specified VISM card line.
cnflntonetimeout Modifies the timeout periods of all call progress tones supported by VISM on
a specified VISM card line.
dellntoneplan Deletes the tone plan configuration of a specified VISM card line.
deltoneplan Deletes a previously added tone plan from the current VISM card.
dsplnringback Displays the ringback tone method for a specified line on the current VISM
card.
dsplntoneplan Displays the tone plan configuration of a specified VISM card line.