5-161
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnflapdtype
cnflapdtype
To configure the various types of Link Access Protocol D channel (LAPD) stacks for a previously added
LAPD, use the cnflapdtype command in the VoIP switching/trunking operating mode.
cnflapdtype line-num ds0-num lapd-type
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that line 2, DS0 12 is configured with the AUSP LAPD stack type:
cnflapdtype 2 12 12
line-num Line number of the D channel to be configured. In the range from 1 to 8.
ds0-num DS0 number that was specified in the addlapd command. It can be a value from one of
the following ranges:
•1 to 24 for T1 lines
•1 to 31 for E1 lines
lapd-type Type of LAPD stack to configure on the specified line and DS0. It can be one of the
following values:
•1 = ITU
•3 = ATT5ESSPRA
•4 = ATT4ESS
•6 = NTDMS100PRA
•7 = VN2 or 3
•8 = INSNet
•9 = TR6MFC
•10 = TR6PBX
•12 = AUSP
•13 = NIL
•14 = SSETSI
•15 = BC303TMC
•16 = BC303CSC
•17 = NTDMS250
•18 = Bellcore
•19 = NI2