5-427
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspsesstat
dspsesstat
To display configuration data about Primary Rate Interface (PRI) backhaul session statistics (counters),
use the dspsesstat command in the VoIP switching/trunking operating mode.
dspsesstat session-num
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the statistics (counters) for the PRI backhaul session set number 1 are
displayed:
dspsesstat 1
vismRudpSessionStatNum: 1
vismRudpSessionAutoResets: 0
vismRudpSessionRcvdAutoResets: 0
vismRudpSessionRcvdInSeqs: 0
vismRudpSessionRcvdOutSeqs: 0
vismRudpSessionSentPackets: 5
vismRudpSessionRcvdPackets: 0
vismRudpSessionSentBytes: 0
vismRudpSessionRcvdBytes: 0
vismRudpSessionDataSentPkts: 0
vismRudpSessionDataRcvdPkts: 0
vismRudpSessionDiscardPkts: 0
vismRudpSessionRetransPkts: 0
Related Commands
session-num Session number for which you want to display PRI backhaul session statistics. It can
be in the range from 1 to 64.
Command Description
addsesset Adds a PRI backhaul session set between a VISM card and a call agent.
delsesset Deletes a PRI backhaul session set.