5-275
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
deltoneplan
deltoneplan
To delete a provisional tone plan from the system, use the deltoneplan command in the VoIP
switching/trunking and switched AAL2 PVC operating modes.
deltoneplan tonep-region tonep-version
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines If the tone plan you want to delete is assigned to a VISM card line, you cannot delete the tone plan. Use
the dellntoneplan command to remove a tone plan assignment from a VISM card line.
This command does not delete the tone plan file from the TFTP server, which allows you to use the
addtoneplan command to add the tone plan back into the system, as needed.
Note You cannot delete built-in tone plans from the system with this command.
Examples The following example shows that the tone plan identified by the to ne pl an regi on na me sin gapo re a nd
tone plan version number 11 is deleted from the current VISM card:
deltoneplan singapore 11
Related Commands
tonep-region Tone plan country or region which you want to delete from VISM. It can be in
the range from 1 to 64 alphanumeric characters. This a rgument is ca se
sensitive.
tonep-version Tone plan version number of the tone plan country or region you want to delete
from VISM. It can be in the range from 1 to 65535.
Command Description
addtoneplan Adds a tone plan to the current VISM card.
cnflnringback Configures the ringback tone method for a specified line on the current VISM
card.
cnflntoneplan Assigns a tone plan to a specified VISM card line.
cnflntonetimeout Modifies the timeout periods of all call progress tones supported by VISM on
a specified VISM card line.
dellntoneplan Deletes the tone plan configuration of a specified VISM card line.
dsplnringback Displays the ringback tone method for a specified line on the current VISM
card.
dsplntoneplan Displays the tone plan configuration of a specified VISM card line.
dsplntonetimeout Displays the configured timeout periods for all call progress tones of a
specified VISM card line.
dsptonebuiltinplans Displays all preconfigured (built-in) tone plans on the current VISM card.