5-341
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspdpvcoamparams
dspdpvcoamparams
To display the transmitted and received permanent vir tual cir cu it ( PVC) ope ratio ns, admi ni stra tion, and
maintenance (OAM) cell parameters, use the dspdpvcoamparams command in the VoIP
switching/trunking operating mode.
dspdpvcoamparams
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the transmitted and received PVC OAM cell parameters are
displayed:
dspdpvcoamparams
OAM Cell Gap : 500ms
OAM Cell Retry Count : 3
OAM Cell Recovery Count: 5
Related Commands Command Description
cnfdpvcoamparams Configures the transmitted and received PVC OAM cell parameters.