5-128
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfconcac
cnfconcac
To configure connection admission control (CAC) on a previously added connection, use the cnfconcac
command in the AAL2 trunking operating mode.
cnfconcac lcn conn-type
Syntax Description
Command Modes AAL2 trunking
Usage Guidelines You must use the cnfcac command prior to using this command to enable CAC at the card level. If the
PVC has been configured as master, CAC functionality is applied to the master end of the PVC only.
Examples The following example shows that CAC is configured at the master end of L CN 13 1:
cnfconcac 131 1
Related Commands
lcn Logical channel number of the connection; in the ra nge fr om 13 1 to 51 0.
conn-type Connection type. It can be one of the following values:
•1 = Master
•2 = Slave (Default)
Command Description
cnfcac Enables or disables the CAC feature on a VISM card.
dspconcac Displays CAC configuration data for a connection.